|
Ny side 1
Compact Duo-Power
6S-EQ Lader det hele
kan kører på 12V og 220V.
Laderen har indbygget balancer til Li-Po, Li-Ion og A123 (Li-Fe) celler.
Robbe Compact Duo-Power 6S-EQ
er en lækker computerlader med 2 liniers display 16 character.
Det er en rigtig god lader der er nem at indstille.
Ydelsen på laderen er max 50W. Skal du lade mere end 8 celler vil laderen selv
skrue ned for strømmen.
Eks. 10 celler lades til sidst med ca. 3.5A.
3S Li-Po oplades med ca. 4,0 A ved 12,50V.
3S - A123 akku oplades med ca. 4,8A ved 10,35V
Følgende kan fremhæves:
Indbygget balancer
BID computer chip gemmer data på batteri
Viser den ladet / afladet mængde i mAh
Viser spændingen med 3 cifre. F.eks. 12.399 Volt eller 4.197V
Viser lade tid i minutter og sekunder. F.eks. 2 timer og 12 sek = 120:12
Hurtig og simpel indstilling
Baggrundsbelysning (fint til aften/nat flyvning)
| Power |
10 - 15 V DC /
230 V |
| Celler LiPo / LiFe / LiIo
|
1 - 6 |
| Celler NiCd / NiMH |
1 - 14 |
| Ladestrøm |
0.1 - 5 A (max. 50 W) |
| Afladning |
0.1 - 1 A (max. 5W) |
| Mål |
140x100x55mm |
Kommer uden div kabler
Ekstra
Kabler klik Her
 vejledning
Compact, 230 / 12 V charge /
discharge station with battery management for NC / NiMH batteries consisting
of 1 ... 14 cells, LiIo, LiPo and LiFe packs consisting of 1 ... 6 cells,
and 2 ... 12 V Lead-Acid batteries. With integral Equalizer and BID system.
The universal charger
A small, compact charger unit for charging ´on the move´ using a 12 Volt
supply, or at home using a 100 - 240 V 5 A switch-mode mains PSU. The broad
current range of 0.1 to 5 A makes the unit suitable for use with small
slow-fly batteries and transmitter / receiver batteries, as well as large
drive or flight packs.
Clear display of charge parameters and battery data on the blue backlit LCD
screen with two lines of 16 characters.
The integral Equalizer automatically brings the individual cell voltages of
the Lithium battery up to the same level. The Equalizer current is
approximately 250 mA, and is sufficient for batteries with capacities of
more than 5 Ah.
robbe BID system (Battery Identification system) ensures simple, safe
operation and automatic storage of essential battery data.
Particular advantages:
Simply connect the BID key to the charger, and the charge process begins.
No tiresome searching through the menu for
the set-up parameters
Maximum protection from accidental
mis-setting
Essential battery data is stored in the BID
key
Of course, the Power Peak Compact charger can also charge batteries not
fitted with the BID system.
One BID key is supplied with the charger as standard.
Functions:
Charge - discharge - cycle (discharge ->
charge).
Setting of charge / discharge current,
capacity, battery type and cell count.
Display of charged-in and discharged
capacity.
Display of charge / discharge time.
Display of input voltage and charge voltage.
Display of Equalizer - individual cell
voltage, optionally as summary (with two decimal points resolution) or as a
list function with three decimal points resolution (1/1000 Volt).
NC / NiMH batteries
1 ... 14 cells
The automatic digital Delta-Peak cut-off
circuit switches the charge process off at the correct time, and is set up
to match NC and NiMH batteries.
Lithium batteries
1 ... 6 cells
Display of individual cell voltages of
Lithium batteries
Automatic charge cut-off circuit using the
CC-CV charge method
Lead-Acid batteries
1 ... 6 cells (2 ... 12 Volt)
Automatic charge cut-off using the CC-CV
charge method
|
|
Warning: I am able to write to the configuration file: /home/happysale/public_html/includes/configure.php. This is a potential security risk - please set the right user permissions on this file.
